Carburetor Suitable for Toyota Corona 2.0L

Introduction:
A carburetor/carburettor is a device that mixes air and fuel for internal combustion engines in the proper air–fuel ratio for combustion. A carb consists of an open pipe through which the air passes into the inlet manifold of the engine, it allows air and fuel into the engine through valves, mixing them together in different amounts to suit a wide range of different driving conditions.

Feature:
1.High hardness and corrosion resistance, longer usage life
2.Compact size, less fuel consumption, energy saving and economical
3.Let your vehicles speed up in a short time, better driving experience
4.Control the speed of engine under stable condition, effective operation
5.Improve the structure during manufacturing process, high accuracy

Specification：
Type: Carburetor
Material: Aluminium/Zinc

Fiement Type: Direct Replacement

OEM / Part Number: 21100-75030

Fitment：

Compatible with Toyota 4Y HIACE 4Runner HILUX 2.2 LTR Petrol Carburettor Carby Vergaser

Replacement Carburetor For 4Y HIACE 4Runner HILUX & Corona 1Y, 2Y, 3Y, 4Y & 2rz Type Engines YH50/51/60/61

(Please compare your carburetor with pictures and check the part number to ensure you will get the right item.)

Package contents:：
1x Carburetor

NOTE:
-This product should be installed by a carburettor specialist.
-You may have to rejet carby to suit your engine and/or swap linkage & wire plug off your old carby to suit your engine setup. On automatic's you have to swap the base/tps over onto the new carburettor, as this tps is not supplied.
-Please confirm that the base on your old carburettor is the same as the base in the pictures / listing.
-This carburettor should be carefully inspected before fitting.As most carburettor models are no longer available new, this unit's fittings, hoses, vacuum ports, linkages & electrical plugs may differ from your old orginal carburettor. Therefore, this carburettor may require adapting, modifcation or rejetting to suit your vehicle and main jets & idle jets may need to be swapped across from your old carburettor.Check the pump squirt & float prior to installation.
-Warranty on this product only covers a fault that has occurred due to manufacturing not from mismatched application, incorrect jetting or disassembling.